Toyota RAV4 3D-printable parts

Replacement flexible roof mounting plugs for the first-generation Toyota RAV4, with solid versions for vehicles without a roof rack and pierced versions for vehicles retaining the factory rack.

Five-piece mounting system for centring an aftermarket reverse camera beneath the third brake light on the 2006–2012 RAV4. It reuses the factory screw locations, clears the rear wiper, and was tested through an automatic car wash.

Drop-in coin organiser for the upper centre-console compartment of the 2007–2012 RAV4. It keeps coins sorted and prevents them falling into the lower compartment

Drop-in spacer that reduces the oversized cup-holder opening in a 2011 RAV4 so common drink containers are held more securely.

Replacement casing for the remote key used on Toyota RAV4 models from 2000 through 2006, covering the second-generation XA20.

Replacement locking nut for the map-light switch in a 2005 Toyota RAV4.

Clip-on seat-back hook made and used on a 2006 RAV4 for carrying small bags, packets or a light rubbish bag.

Replacement parcel-shelf mounting piece for the 2006–2009 RAV4 rear cargo cover.

Replacement upper and lower hinge pieces for the centre-armrest cover on the 2000–2005 Toyota RAV4.

Replacement trim cover for a seat mounting point on the 2006–2012 RAV4 XA30.

Fitted organizer insert for the centre armrest of the 2000–2005 Toyota RAV4.

Test-printed replacement clip for the centre console of a 2008 RAV4, designed after the original clip broke.

Replacement ABS mounting block for the harness cover on the 2000–2005 Toyota RAV4.

Drop-in centre-console organiser sized to hold a lip-balm tube upright in the 2006–2012 RAV4. Use a heat-resistant cabin material

Two-piece housing for relocating the factory on-board-computer display from Toyota radio 58812 in a 2000–2005 RAV4.

Drop-in phone holder for the small pocket beside the parking brake in a 2010 RAV4, sized for an iPhone 6 in a low-profile case and positioned near the auxiliary socket.

Replacement cover for the VIN-number inspection opening on the 2000–2005 Toyota RAV4.

Protective grille for an eight-inch custom subwoofer installation in a 2006 RAV4.

Replacement trim cover for the seat mounting point on the 2000–2005 Toyota RAV4.

Dashboard-mounted phone-support bracket designed around a 2002 Toyota RAV4 and reported suitable for first- and second-generation interiors.

Replacement upper cushion for the luggage door of the second-generation Toyota RAV4, replacing the small factory piece that is easily knocked out.

Replacement flexible button pad for the remote key used with the 2006 RAV4. The author printed it in flexible TPE at full infill.

Replacement panel for the stock auxiliary-input position in a 2011 RAV4, adding both USB power and auxiliary audio without permanent vehicle modification. It is designed around the author's documented USB adapter and uses two 25 mm M3 screws.

Dashboard-clipping phone mount designed specifically for the 2016 Toyota RAV4, supplied with left and right clips plus standard, extended and angled PopSocket holder variants.

Replacement mounting shell for the factory-style reversing camera on 2016–2018 Toyota RAV4 models, with author-provided ABS scaling and support guidance.

No-support phone cradle fitted to the triangular recess beside the gear selector in fourth-generation 2013–2018 Toyota RAV4 models, sized for phones up to 83 by 10 mm.

Tested replacement glovebox handle for the 2013 Toyota RAV4, intended as a functional interim replacement and recommended by the author for a solid print.

Four-piece swivelling phone holder designed and photographed in a 2018 Toyota RAV4, with a charging-cable opening and a base positioned clear of the shifter and cupholders.

A fitted upper organiser tray for the centre console of a 2021 Toyota RAV4 LE AWD.

A fitted RAV4 Prime centre-console cup-holder insert sized for Nalgene and cycling water bottles.

A 65 mm reducing ring for the loose factory cup holder in 2019–2025 Toyota RAV4 models.

A fitted fifth-generation Toyota RAV4 centre-console Gridfinity baseplate and matching storage-bin set.

A left-and-right fitted drawer pair for the dashboard centre tray in 2019–2025 Toyota RAV4 models.

A hand tool supplied by the author for removing the fitted 2019 Toyota RAV4 winter-wheel centre caps.

A fitted RAV4 Prime centre-console cup-holder expander for 32 oz and 40 oz Hydro Flask bottles.

A wall support and connector hanger for securely storing the removable Toyota RAV4 Prime charging unit.

A tested fitted centre-console organiser for the 2020 Toyota RAV4, with coin and sunglasses storage.

A two-piece minimalist replacement enclosure for the key fob of a 2020 Toyota RAV4 XLE Hybrid.

A fitted under-tray storage divider designed and tested in a 2023 RAV4 XSE and stated for 2019–2024 models.

A tested replacement rivet for the rear-seat folding-latch release linkage of a 2019 Toyota RAV4.